5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
696
7-75
show route-map
To display a route map, use the
show route-map
command in Privileged EXEC mode.
show route-map [map-name]
Parameters
map-name
(Optional) Name of a specific route map.
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following shows example CLI display output for the command.
(Routing)#show route-map test
route-map test, permit, sequence 10
Match clauses:
ip address prefix-lists: orange
Set clauses:
set metric 50
7-76
clear ip prefix-list
To reset IP prefix-list counters, use the
clear ip prefix-Iist
command in Privileged EXEC mode. This
command is used to clear prefix-list hit counters. The hit count is a value indicating the number of
matches to a specific prefix list entry.
clear ip prefix-list [[prefix-list-name] [network/Iength]]
Parameters
prefix-list-name
(Optional) Name of the prefix list from which the hit count is to be
cleared.
network/Iength
(Optional) Network number and length (in bits) of the network mask. If
this option is specified, hit counters are only cleared for the matching
statement.
