5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
139
Display Parameters
filename
Indicates the name of the application.
start-on-boot
Indicates whether or not the application is configured to initiate on boot
up.
•
Yes indicates that the application will initiate on boot up.
•
No indicates that the application will not initiate on boot up.
auto-restart
Indicates whether or not the application process is configured to restart
automatically after it ends.
•
Yes indicates that the application process will restart after it
ends.
•
No indicates that the application process will not restart
automatically after it ends.
Max-CPU-Util
Indicates, as a percentange, the
configured application CPU utilization
limit. “None” is shown if unlimited.
Max-memory
Indicates, in megabytes, the configured application memory limit. “None”
is shown if unlimited.
5-5
show application files
This command is used to show
the files in the switch‘s file system application directory.
show application files
Parameters
None
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following is an example of the CLI display output for the command.
(Routing) #show application files
OpEN application process directory contents:
Total bytes for all files = 5
