5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
1208
slot/port
Enter an interface in slot/port format.
control-plane
Display access list information on management (CPU) port.
lag lag-id
Enter into interface lag mode.
lag-intf-num
Enter LAG interface number.
in
Display access list information for a particular interface and the in
direction.
out
Display access list information for a particular interface and the out
direction.
Default
The default is None.
Command Mode
Privileged EXEC
Display Parameters
ACL Type
Type of access list (IP, IPv6 or MAC).
ACL ID
Access List name for a MAC or IPv6 access list or the numeric identifier
for an IP access list.
Sequence Number
An optional sequence number may be specified to indicate the order of
this access list relative to other access lists already assigned to this
interface and direction. A lower number indicates higher precedence
order. If a sequence number is already in use for this interface and
direction, the specified access list replaces the currently attached
access list using that sequence number. If the sequence number is not
specified by the user, a sequence number that is one greater than the
highest sequence number currently in use for this interface and direction
is used. Valid range is (1 to 4294967295).
in | out
•
in – Display Access List information for a particular interface and
the in direction.
•
out – Display Access List information for a particular interface
and the out direction.
12-81 show access-lists vlan
This command displays Access List information for a particular VLAN ID.
show access-lists vlan vlan-id {in | out}
Parameters
vlan vlan-id
Display access list information for a particular vlan ID.
