5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
1220
Use the
no
command to disable the management restrictions.
management accesss-class {console-only | name}
no management access-class
Parameters
name
Specify the name of the access list.
console-only
Allow management through console only.
Default
The default is None.
Command Mode
Global Config
12-91 show management access-list
This command displays management access-lists.
show management access-list [listname]
Parameters
listname
(Optional) Specify the name of the access list.
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following shows example CLI display output for the command.
(Routing)#show management access-list
List Name........................................ mlist
List Admin Mode.................................. Disabled
Packets Filtered................................. 0
Rules:
permit ethernet 0/1 priority 63
permit ethernet 0/9 priority 64
