5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
1004
10-22 show ipv6 pim bsr-router
Shows the bootstrap router (BSR) information.
show ipv6 pim bsr-router {candidate | elected}
Parameters
candidate
Indicates the PIM BSR candidate table information.
elected
Indicates the PIM BSR elected table information.
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Example
The following is an example of the CLI display output for the command.
(Routing)#show ipv6 pim bsr-router elected
BSR Address...................................... 3001::1
BSR Priority .................................. 150
BSR Hash Mask Length .......................... 120
Next Bootstrap message (hh:mm:ss) ............. 00:00:15
(Routing)#show ipv6 pim bsr-router candidate
BSR Address...................................... 3001::1
BSR Priority .................................. 150
BSR Hash Mask Length .......................... 120
C-BSR Advertisement Interval (secs) ........... 60
Next Bootstrap message (hh:mm:ss) ............. NA
The following message will be displayed if no selected or configured BSRs exist on the router:
No BSR's exist/learned on this router.
Display Parameters
BSR Address
IPv6 address of the BSR.
BSR Priority
Priority as configured in the ipv6 pim bsr-candidate command.
