5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
841
Parameters
None
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following provides an example of the command.
(1b6m)#show route preferences
Local............................................ 0
Static........................................... 1
OSPF Intra....................................... 110
OSPF Inter....................................... 110
OSPF External.................................... 110
BGP External..................................... 20
BGP Internal..................................... 200
BGP Local........................................ 200
Display Parameters
Local
Preference of directly-connected routes.
Static
Preference of static routes.
OSPF lntra
Preference of routes within the OSPF area.
OSPF Inter
Preference of routes to other OSPF routes that are outside of the area.
OSPF External
Preference of OSPF external routes.
BGP External
Preferepce of BGP external routes.
BGP Internal
Preference of routes to other BGP routes that are outside of the area.
BGP Local
Preference of routes within the BGP area.
8-49
show ipv6 route summary
Shows a summary of the routing table’s current status. If the optional
all
keyword is used, then some
statistics, such as the number of routes from each source, will also include counts for alternate routes. An
alternate route consists of a route that is not the most preferred route to its own destination, such that it is
not installed in the forwarding table. To be shown only the number of best routes, omit the optional
keyword.
show ipv6 route summary [all]
