5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
768
Default Route Advertise........................ Disabled
Always......................................... False
Metric......................................... Not configured
Metric Type.................................... External Type 2
Number of Active Areas........................... 1 (1 normal, 0 stub, 0 nssa)
ABR Status....................................... Disable
ASBR Status...................................... Disable
Stub Router...................................... FALSE
Stub Router Status............................... Inactive
Stub Router Reason............................... <reason>
Stub Router Startup Time Remaining............... <duration> seconds
Stub Router Duration............................. <duration>
External LSDB Overflow........................... FALSE
External LSA Count............................... 0
External LSAChecksum............................. 0
AS_OPAQUE LSA Count.............................. 0
AS_OPAQUE LSA Checksum........................... 0
New LSAs Originated.............................. 55
LSAs Received.................................... 82
LSA Count........................................ 1
Maximum Number of LSAs........................... 24200
LSA High water Mark.............................. 9
AS Scope LSA Flood List Length................... 0
Retransmit List Entries.......................... 0
Maximum Number of Retransmit Entries............. 96800
Retransmit Entries High water Mark............... 1
NSF Helper Support............................... Always
NSF Helper Strict LSA Checking................... Enabled
Prefix-suppression............................... Disabled
Display Parameters
Note:
Some of the information below displays only if you enable OSPF and configure certain features.
Router ID
32-bit integer in dotted decimal format identifying the router, about which
information is displayed.
OSPF Admin Mode
Shows whether the administrative mode of OSPF in the router is
enabled or disabled.
RFC 1583 Compatibility
Indicates whether 1583 compatibility is enabled or disabled.
External LSDB Limit
Maximum number of nondefault AS-external-LSA (link state
advertisement) entries that can be stored in the link-state database.
Exit Overflow Interval
Number of seconds after entering overflow state that a router will
attempt to leave overflow state.
Spf Delay Time
Number of seconds between two subsequent changes of LSAs, during
which time the routing table calculation is delayed.
Spf Hold Time
Number of seconds between two consecutive SPF calculations.
Flood Pacing Interval
Average time, in milliseconds, between LS Update packet transmissions
