5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
884
NSF help Strict LSA
checking
Indicates whether strict LSA checking has been enabled. lf enabled,
then an OSPF helpful neighbor will exit helper mode whenever a
topology change occurs. If disabled, an OSPF neighbor will continue as
a helpful neighbor in spite of topology changes.
8-111 show ipv6 ospf abr
Shows the internal OSPFv3 routes used to reach Area Border Routers (ABR). This command allows no
options.
show ipv6 ospf abr
Parameters
None
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Display Parameters
Type
The type of the route to the destination. It can be either:
•
intra – intra-area route
•
inter – Inter-area route
Router ID
Router ID of the destination.
Cost
Cost of using this route.
Area ID
The area ID of the area from which this route is learned.
Next Hop
Next hop toward the destination.
Next Hop lntf
The outgoing router interface to use when forwarding traffic to the next
hop.
8-112 show ipv6 ospf area
Shows information regarding the area. The
areaid
parameter identifies the OSPF area that is shown.
show ipv6 ospf area areaid
