5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
197
The
no
command is used to remove the configured email source address.
logging email from-addr from-address
no logging email from-addr from-address
Parameters
from-addr from-address
Indicates the sender email address.
Default
The default is [email protected].
Command Mode
Global Config
5-62
logging email message-type subject
This command is used to configure the subject line used for an email of the specified type.
The
no
command is used to remove the configured email subject line for emails of the specified message
type and thus restores the subject line to the default email subject.
logging email message-type {urgent | non-urgent | both} subject subject
no logging email message-type {urgent | non-urgent | both} subject subject
Parameters
both
Indicates both urgent and non urgent message types.
non-urgent
Indicates non urgent message types.
urgent
Indicates urgent message types.
subject subject
Indicates the subject line for the email alert.
to-addr to-address
Indicates the recipient email address for the alert.
Default
The default is as follows:
•
For urgent messages, the subject line, by default, is “Urgent Log Messages”.
•
For non-urgent messages, the subject line, by default, is “Non Urgent Log Messages”.
Command Mode
Global Config
