5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
748
no exit-overflow-interval
Parameters
seconds
Indicates the interval in seconds (0-2147483647).
Default
The default is 0 second.
Command Mode
Router OSPF Config
7-151 external-lsdb-limit (OSPF)
Configure the external LSDB limit for OSPF. If the value is -1, then there is no limit. When the number of
non-defaultAS-external-LSAs in a router’s link-state database reaches the external LSDB limit, the router
enters overflow state. The router never holds more than the external LSDB limit non-defaultAS-external-
LSAs in it database. The external LSDB limit MUST be set identically in all routers attached to the OSPF
backbone and/or any regular OSPF area.
No
command configures the default external LSDB limit for OSPF.
external-lsdb-limit -1-2147483647
no external-lsdb-limit
Parameters
None
Default
The default is -1.
Command Mode
Router OSPF Config
7-152 log-adjacency-changes
To enable logging of OSPFv2 neighbor state changes, use the log-adjacency-changes command in
router configuration mode. State changes are logged with INFORMATIONAL severity.
No
command disables state change logging.
log-adjacency-changes [detail]
