5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
1221
Note: All other access is implicitly denied.
Display Parameters
List Name
Displays the name of the access list.
List Admin Mode
Displays the admin mode status (disabled/enabled) of the list.
Packets Filtered
Displays the number of filtered packets through the rule.
12-92 show management access-class
This command displays information about the active management access list.
show management access-class [name]
Parameters
name
(Optional) Displays the name of the access list. If unspecified, defaults
to an empty Access-List. (Range: 1 - 32characters)
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following shows example CLI display output for the command.
(Routing)#show management access-class
Management access-class is enabled, using access list mlist
Time Range Commands for Time-Based ACLs
Time-based ACLs allow one or more rules within an ACL to be based on time. Each ACL rule within an
ACL except for the implicit deny all rule can be configured to be active and operational only during a
specific time period. The time range commands allow you to define specific times of the day and week in
order to implement time-based ACLs. The time range is identified by a name and can then be referenced
by an ACL rule defined with in an ACL.
12-93 time-range
