5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
470
5-437 ip dhcp snooping database write-delay
Use this command to configure the interval in seconds at which the DHCP Snooping database will be
persisted. The interval value ranges from 15 to 86400 seconds.
Use the
no
command to set the write delay value to the default value.
ip dhcp snooping database write-delay 15-86400
no ip dhcp snooping database write-delay
Parameters
None.
Default
The default is 300 seconds.
Command Mode
Global Config
5-438 ip dhcp snooping binding
Use this command to configure static DHCP Snooping binding.
Use the
no
command to remove the DHCP static entry from the DHCP Snooping database.
ip dhcp snooping binding mac-address vlan vlan-id ip address interface interface-id
no ip dhcp snooping binding mac-address vlan vlan-id ip address interface interface-id
Parameters
mac-address
Enter MAC address.
vlan vlan-id
Indicates the VLAN ID.
ip address
Indicates the IP address for the location.
interface interface-id
Indicates the interface to specify.
Default
The default is None.
Command Mode
Global Config