5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
800
7-210 ip ospf bfd
Enable BFD on interfaces associated with the OSPF process.
No
command disables BFD on interfaces associated with the OSPF process.
ip ospf bfd
no ip ospf bfd
Parameters
None
Default
The default is Disabled.
Command Mode
Interface Config
7-211 neighbor fall-over bfd
Enable BFD support for fast failover for a BGP neighbor.
No
command disables BFD support for fast failover for a BGP neighbor.
neighbor ipaddress fall-over bfd
no neighbor ipaddress fall-over bfd
Parameters
ipaddress
Enter the IP address (IPv4/IPv6) of the peer.
Default
The default is Disabled.
Command Mode
Router BGP Config
Example
Do the following to trigger BFD processing through BGP on an interface that is associated with it.
(Router)(Config)#router bgp [bgp ID]
(Router)(Config-router)#neighbor 172.16.11.6 fall-over bfd
(Router)(Config-router)#exit