5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
1113
Missing mandatory path
attribute
An UPDATE message was received without a mandatory path attribute.
Missing LOCAL PREF
attribute
An UPDATE message received from an internal peer without the
LOCAL PREF attribute.
Invalid prefix in UPDATE
NLRI
An UPDATE message received from this peer contained a syntactically
incorrect prefix.
11-116 show ip bgp neighbors advertised-routes
This command displays the list of IPv4 routes advertised to a specific neighbor. These are the routes in
the adjacent RIB out for the neighbor’s outbound update group.
show ip bgp [vrf vrf-name] neighbors ip-address advertised-routes
Parameters
vrf vrf-name
(Optional) Display routes belonging to communities within a VRF
instance.
ip-address
The IP address of a neighbor.
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following shows example CLI display output for the command.
(Routing)#show ip bgp neighbors 172.20.101.100 advertised-routes
BGP table version is 5, local router ID is 20.1.1.1
Status codes: p advertisement pending
Origin codes: i - IGP, e - EGP, ? – incomplete
Originating default network 0.0.0.0
Version
Network
Next Hop
Metric
Local Pref
Path
5
172.20.1.0/24
172.20.101.1
10
100
20 10
i
p 5
20.1.1.0/24
172.20.161.1
100
20
?
Note:
This output differs slightly from the output in
show ip bgp
. Suppressed routes and non-best Routes
are not advertised, so these status codes are not relevant here. Advertised routes always have A single
next hop, the BGP NEXT HOP advertised to the peer. Local preference is never sent to external peers.
The output indicates whether BGP is configured to originate a default route to this peer (neighbor default-
originate).
