5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
595
Example
The foll
owing example of the command configures an interface to be connected with an FCF switch.
(Config)#interface 0/1
(Interface 0/1)#fip-snooping port-mode fcf
(Interface 0/1)#exit
The following example of the command sets an interface to be connected with the host.
(Config)#interface 0/1
(Interface 0/1)#no fip-snooping port-mode fcf
(Interface 0/1)#exit
6-24
show fip-snooping
The
show fip-snooping
command is used in the User EXEC or the Privileged EXEC mode to show
information regarding the global FIP snooping configuration and status.
show fip-snooping
Parameters
None
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Example
The following is an example of the CLI display output for the command.
(switch)#show fip-snooping
Global Mode:
Enable
FCoE VLAN List:
2,4,5-8
FCFs:
2
ENoi:les :
2
Sessions :
10
Max VLANs:
8
Max FCFs in VLAN:
4
Max ENodes:
312
Max Sessions:
1024
