5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
339
------------------------------
Uplinkfast transitions (all VLANs).................... 0
Proxy multicast addresses transmitted (all VLANs)..... 0
Display Parameters
Uplinkfast transitions
(all VLANs)
The number of uplinkfast transitions on all VLANs.
Proxy multicast addresses
transmitted (all VLANs)
The number of proxy multicast addresses transmitted on all VLANs.
5-248 show spanning-tree vlan
Displays spanning tree information per VLAN and list the port roles, states and port cost. The
vlan-list
parameter is a list of VLANs or VLAN-ranges separated by commas and with no embedded blank spaces,
ranging form “X-Y” where X and Y are valid VLAN identifiers and X<Y. The
vlanid
corresponds to an
existing VLAN ID.
show spanning-tree vlan {vlanid | vlan-list}
Parameters
vlanid
Enter a VLAN identifier.
vlan-list
Enter VLAN IDs in range <1-4093>. Use '-' to specify a range, or ',' to
separate VLAN IDs in a list. Spaces and zeros are not permitted.
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Example
The following is a CLI display output example.
(Routing)#show spanning-tree vlan 1
VLAN
1
Spanning-tree enabled protocol rpvst
RootID
Priority
32769
Address
00:0C:29:D3:80:EA
Cost
0
Port
This switch is the root
Hello Time 2 Sec Max Age 15 sec Forward Delay 15 sec
BridgeID
Priority
32769 (priority 32768 sys-id-ext 1)
Address
00:0C:29:D3:80:EA
