5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
1043
Parameters
external-distance
The preference value for routes learned from external peers. The range
is 1 to 255.
internal-distance
The preference value for routes learned from internal peers. The range
is 1 to 255.
local-distance
The preference value for locally-originated routes. The range is 1 to 255.
Default
The default is as follows: external – 20, internal – 200, local – 200.
Command Mode
IPv6 Address Family Config
11-30 distribute-list prefix in
Use this command to configure a filter that restricts the routes that BGP accepts from all neighbors based
on destination prefix. The distribute list is applied to all routes received from all neighbors. Only routes
permitted by the prefix list are accepted. If the command refers to a prefix list that does not exist, the
command is accepted and all routes are permitted.
Use the
no
command to disable a filter that restricts the routes that BGP accepts from all neighbors
based on destination prefix.
distribute-list prefix list-name in
no distribute-list prefix list-name in
Parameters
list-name
A prefix list used to filter routes received from all peers based on
destination prefix.
Default
The default is as follows: distribute lists are not defined.
Command Mode
•
BGP Router Config
•
IPv4 VRF Address Family Config
11-31 distribute-list prefix out
Use this command to configure a filter that restricte advertisement of routes based on destination prefix.
Only one instance of this command may be defined for each route source (RIP. OSPF. static, connected).
One instance of this command may also be configured as a global filter for outbound prefixes.
