5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
889
Total
Total number of router LSAs in the OSPFv3 link state database.
8-116 show ipv6 ospf interface
Shows the information for an IFO object or for virtual interface tables. The slot/port argument corresponds
to either a physical routing interface or a VLAN routing interface. The keyword
VLAN
is utilized, instead of
the
slot/port
format, to directly specify the VLAN ID of the routing VLAN.
show ipv6 ospf interface {slot/port | brief |vlan 1-4093 | loopback loopback-id | tunnel tunnel-id}
Parameters
slot/port
Enter an interface in slot/port format.
brief
Display snapshot of OSPF interfaces configured.
vlan 1-4093
Enter an interface in VLAN format.
loopback loopback-id
Display the configured Loopback interface information.
tunnel tunnel-id
Display the configured Tunnel interface information.
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Display Parameters
IP Address
The IPv6 address of the interface.
iflndex
The interface index number associated with the interface.
OSPF Admin Mode
Shows whether the admin mode is enabled or disabled.
OSPF Area ID
The area ID associated with this interface.
Router Priority
The router priority. The router priority determines which router is the
designated router.
Retransmit Interval
The frequency, in seconds, at which the interface sends LSA.
Hello Interval
The frequency, in seconds, at which the interface sends Hello packets.
Dead Interval
The amount of time. in seconds, the interface waits before assuming a
neighbor is down.
LSA Ack Interval
The amount of time, in seconds, the interface waits before sending an
LSA acknowledgement after receiving an LSA.
