5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
609
Display Parameters
Flow Type
The type of flow. (For example, 1.0 or Layer 2 Match).
Flow Table
The hardware table in which the flow is installed.
Flow Priority
The priority o
f the flow versus other flows.
Match Criteria
The match criteria specified by the flow.
Ingress Port
The port on
which the flow is active.
Action
The action specified by the flow.
Idle
The time since the flow was hit.
Installed in hardware
lf the flow could be added to the hardware.
1. 0 is displayed if the flow cannot be added.
2. 1 is displayed if the flow was added.
6-40
show openflow installed groups
This command is used to show a list of the configured groups on the switch
show openflow installed groups
Parameters
None
Default
The default is None.
Command Mode
Privileged EXEC
Example
(Routing)#show openflow installed groups
Max Indirect Group Entries....................... 1234
Current Indirect Group Entries in database....... 123
Max All Group Entries............................ 1234
Current A11 Group Entries in database............ 123
Max Select Group Entries......................... 1234
Current Select Group Entries in database......... 123
Group Id 12345678 type “Indirect”
========================================
Ref Count
1 : Duration
8 : Bucket Count
1
