5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
93
Parameters
username
Indicates the username under which the SNMPv3 user will connect to
the switch. The allowed range of characters is 1 to 30 characters.
groupname
Indicates the name of the group to which the user belongs. The allowed
range of characters is 1 to 30 characters.
remote engineid-string
(Optional) Indicates the engine-id of the remote management station
from which the user in question will be connecting. The allowed range of
characters is 5 to 32 characters.
auth-md5 password | auth-
sha password
(Optional) Indicate the password that the user in question will use for the
authentication or encryption mechanism. The allowed range of
characters is 1 to 32 characters.
auth-md5-key md5-key
(Optional) Indicates a pregenerated MD5 authentication key. The length
of this key will be 32 characters.
auth-sha-key sha-key
(Optional) Indicates a pregenerated SHA authentication key. The length
of this key will be 48 characters
priv-des password
(Optional) Indicates the user password for authentication or encryption.
The range is 1 to 32 characters.
priv-des-key des-key
(Optional) Indicates a pregenerated DES encryption key. The length of
this key will be 32 characters if MD5 is selected, whereas it will be 48
characters if SHA is selected.
Default
The default is as follows: No users are created.
Command Mode
Global Config
4-107 snmp-server view
This command is used to create or modify an existing view entry that is being utilized by groups to
determine which objects a community or user is granted access to.
The
no
command is used to remove the specified view.
snmp-server view viewname [oid-tree] {included | excluded}
no snmp-server view viewname [oid-tree]
Parameters
viewname
Parameter (range: 1 to 30 characters) label for the view being created.
oid-tree
(Optional) Indicates the OID subtree to be included or excluded from the
view, specified numerically (1.3.6.2.4) or via keywords (system).
included
Indicates the included tree.
