5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
715
Default
The default is 10.
Command Mode
Interface Config
7-103 ip vrrp track ip route
Track the route reachability on an interface or range of interfaces. When the tracked route is deleted, the
priority of the VRRP router will be decremented by the value specified in the
priority
argument. When the
tracked route is added, the priority will be incremented by the same.
A VRRP configured interface can track more than one route. When a tracked route goes down, then the
priority of the router will be decreased by 10 (the default priority decrement) for each downed route. By
default no routes are tracked. If you specify just the route to be tracked, without giving the optional priority,
then the default priority will be set. The default priority decrement is 10. The default priority decrement is
changed using the
priority
argument.
No
command removes the route from the tracked list or to restore the priority decrement to its default.
When removing a tracked IP route from the tracked list, the priority should be incremented by the
decrement value if the route is not reachable.
ip vrrp vrid track ip route ip-address/prefix-length [decrement priority]
no ip vrrp vrid track ip route ip-address/prefix-length [decrement]
Parameters
vrid
Indicates the virtual router ID.
ip-address/prefix-length
Prefix and prefix length of the route to be tracked.
decrement priority
(Optional) Enter amount to decrement router priority (1-254).
Default
The default is 10.
Command Mode
Interface Config
7-104 show ip vrrp interface stats
Display the statistical information about each virtual router configured on the switch.
show ip vrrp interface stats {slot/port | vlan vlan-id} vrid
