5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
60
(Switching)(config-line)#exit
(Switching)(config)#
4-56
aaa ias-user username
Used for the local authentication of users for network access through the IEEE 802.1X feature, the
Internal Authentication Server (IAS) database is a dedicated internal database.
The
aaa ias-user username
command is used in the Global Config mode to add the user specified
therein to the internal user database. This command also causes the mode to be changed to the AAA
User Config mode.
The
no
command is used to remove the user specified therein from the internal database.
aaa ias-user username user
no aaa ias-user username user
Parameters
user
Select an existing Internal Authentication Server user name.
Default
The default is None.
Command Mode
Global Config
Example
The following is an example of the command.
(Routing)#
(Routing)#configure
(Routing)(config)#aaa ias-user username client-1
(Routing)(config-aaa-ias-user)#exit
(Routing)(config)#no aaa ias-user username client-1
(Routing)(config)#
4-57
aaa session-id
This command is used in the Global Config mode in order to specify whether or not the same session-id
is to be used within a session for Authentication, Authorization, and Accounting service type.
The
no
command is used in the Global Config mode in order to reset the aaa session-id behavior to the
default.
aaa session-id [command | unique]
no aaa session-id [command | unique]
