manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 851 / 888

Share
Download
Bay Networks 5390 Administering Download Page 851

D1-55

893-741-B

Software Reference

ROM Monitor Commands

Table D1-19 lists the ROM Monitor commands.

Table D1-19. ROM Monitor Commands 

Command

Arguments

Description

addr

[–d]

Displays the unit’s ROM-resident Ethernet 
address in hexadecimal notation or prompts for 
values.

boot

[–lv | filename]

Boots and loads Model 5390 operational code. 
Only ROM revisions 0600 and greater with the 
self-boot option installed support the –l argument.

config

Displays the current hardware configuration and 
revision levels.

console_
baud

Changes the console port’s baud rate so that it can 
interface with any modem to which it is 
connected.

erase

Erases non-volatile memory.

help or ?

Displays ROM Monitor commands.

image

[–d | filename]

Sets the default image file name.

ipx

[–d ]

Sets several parameters associated with IPX 
booting and dumping.

lat

[–d ]

Allows you to set the LAT key from the ROM 
monitor. 

mop

[–d ]

Sets the MOP load/dump address.

net

Executes a loopback test on the LAN.

ping

host_ip_address [data_size] 
[npackets]

Sends an Internet Control Message Protocol 
(ICMP) mandatory ECHO_REQUEST datagram 
to elicit an ICMP ECHO_RESPONSE from a host 
or gateway. 

ports

Tests the serial line ports.

sequence

[–d | [interface [, interface]...]

Edits the load-dump sequence interface list.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments