manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 320 / 888

Share
Download
Bay Networks 5390 Administering Download Page 320

A12-62

893-741-B

Internet Protocol (IP) Routing

The following na command specifies that RIP does not advertise subnet routes over the Model 5390 
Ethernet interface. Note that the Model 5390 server must be rebooted to effect the change to en0.

admin: set interface=en0 rip_sub_advertise n
admin: quit

You may need to reset the appropriate port, Annex 
subsystem or reboot the Annex for changes to take effect.

annex#: boot 

routed

The Model 5390 routed parameter enables and disables RIP. The syntax is:

routed {Y | N}

Y enables RIP, N disables it. Setting routed to Y activates both passive and active RIP if the 
option_key parameter is set for active RIP; otherwise, only passive routing is enabled. The default 
is Y. 

Reboot the Model 5390 server to put this parameter setting into effect.

Displaying Routing Information

This section describes three diagnostic tools that let you:

•

Display RIP interface statistics.

•

Display the contents of the Model 5390 routing table.

•

Trace the path of a packet as it is routed to its destination.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments