manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 114 / 888

Share
Download
Bay Networks 5390 Administering Download Page 114

A4-8

893-741-B

The Port Server and Rotaries

•

Create a password file (acp_passwd) on the security server(s); see Creating User Password 
Files on page A15-11 for more details.

For local password protection with the port server, define a password for the port_password 
parameter.

Security for Virtual CLI Connections 

The Model 5390 server establishes security for virtual CLI (VCLI) connections using host-based 
security, local password protection, or both. Host-based security validates the user name and user 
password.

The virtual CLI security mechanism is similar to the port server security mechanism in that user 
validation is invoked after the user has requested access to the VCLI at the port server prompt. This 
ensures that the user is authorized to access the VCLI.

To set up host-based security on virtual CLI connections:

•

Set the Model 5390 enable_security parameter to Y.

•

Set the Model 5390 vcli_security parameter to Y.

•

Create a password file (acp_passwd) on the security server(s); see Creating User Password 
Files on page 4-11 for more details.

NOTE: 

The port parameter port_password is applicable to both CLI 

and port server connections.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments