Bay Networks 5390 Administering Download Page 56 | Manualshive

Page: 56 / 888

Bay Networks 5390 Administering Download Page 56

A1-8

893-741-B

Introduction to the Model 5390 Server

•

Send test messages to users.

•

Perform a remote loopback test on other hosts.

Full Routing

The Model 5390 server supports full routing that allows access to all
TCP/IP hosts on the network, regardless of location. The network’s complexity is not an issue: it
can be simple or it can have many subnets and gateways to other networks (for more details on
routing, see Internet Protocol (IP) Routing starting on page A12-1).

Full routing includes:

•

Passive routing in which the Model 5390 server uses the Routing Information Protocol (RIP)
to learn routes.

•

Active routing in which the Model 5390 server uses RIP to advertise learned routes. (The
network administrator enables this feature by setting the option_key parameter to a value
obtained from the Model 5390 supplier).

•

Hardwired routing for smaller networks.

Multi-protocol Support

The Model 5390 server supports multiple protocols, allowing access to Novell NetWare, TCP/IP,
ARA, and LAT hosts and services. The telnet and rlogin commands access TCP/IP hosts; the
connect command accesses LAT services; and remote ARA users dial into the Model 5390 server
and become directly connected ARA network users.

«
...
54
55
56
57
58
...
»

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments