manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 407 / 888

Share
Download
Bay Networks 5390 Administering Download Page 407

893-741-B

A14-51

Configuring Hosts and Servers

Dump Host Services

The Model 5390 server can dump its memory image to a dump host on demand through either the 
superuser CLI command boot –d or the na command dumpboot or on certain software or hardware 
events. A non-recoverable hardware or software error triggers Model 5390 dumps. Dump files are 
intended for use by technical support personnel only.

The host to which the Model 5390 server sends a dump must have bfs or tftp capability. You can 
define a preferred dump host to which the Model 5390 server first tries to upload a dump file. If 
this address is not specified or the host is not available, the Model 5390 server broadcasts a request 
and dumps to the first host that responds.

At the dump host, the dump creates a file, between one and four megabytes in size, in the directory 
/usr/spool/erpcd/bfs for bfs dumping (in the tftp directory for tftp dumping), and assigns a unique 
dump file name to each Model 5390 server. The assigned name depends on whether the dump host 
can support file names longer than 14 characters.

On hosts that support file names longer than 14 characters (for example, BSD UNIX hosts), dump 
files are named dump.xxx.xxx.xxx.xxx. The file extensions xxx.xxx.xxx.xxx are the Model 5390 IP 
address.

On hosts that limit file names to 14 characters (for example, 
System V hosts), the dump creates two additional directories under 
/usr/spool/erpcd/bfs. The name of the first directory is dump; the second is the Model 5390 IP 
network address. Subnet addresses are not used in naming the dump file. The name of the dump 
file is the Model 5390 IP host address.

NOTE: 

Self -boot units without a network host cannot perform a dump.

NOTE: 

If the pref_dump_addr parameter is not set and your IP 

address is corrupted (zero), leave the Test button on the Model 5390 
front panel on and the unit will prompt for an IP address when it tries to 
dump.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments