Bay Networks 5390, Administering, Page: 834 / 888

893-741-B
Software Reference
D1-38
dedicated_port telnet,
rlogin, TCP
port number telnet Specifies application or TCP port number to
which a dedicated port connects.
default_session_mode interactive,
passthru,
passall,
transparent interactive Defines the default session mode when the
VMS interface is configured (that is, when
cli_interface is set to vci).
dialup_addresses Y or N N Enables/disables requesting dial-up address
from ACP.
do_compression Y or N N Starts TCP/IP header compression on the SLIP
link.
echo Y or N Y Enables/disables local character echoing.
erase_char control char.
sequence ^?
(
DEL
key)
Defines the character erase character.
erase_line control char.
sequence ^U Defines the line erase character.
erase_word control char.
sequence ^W Defines the word erase character.
forward_key control char.
sequence "" Reopens the next available higher numbered
session already established at your port.
forwarding_count 0–255 0 When set, the port will not forward received
characters until it receives the specified
number of characters.
forwarding_timer 0–255, off 0 Sets the amount of time, in tens of
milliseconds, that will elapse before
forwarding received data.
hardware_tabs Y or N Y Allows the terminal to expand ASCII tab
characters if the terminal does not support
hardware tabs.
imask_7bits Y or N N When enabled, the Model 5390 port ignores
the eighth bit of received characters.
Table D1-10. Asynchronous Port Parameters (continued)
Parameter Values Default Description