Bay Networks 5390, Administering, Page: 608 / 888

C2-2 893-741-B
Configuration Parameters
after setting it, you can reset it only by using the ROM monitor erase command to erase all of
the Model 5390 server’s nonvolatile memory.
• Parameters that require a string for input allow a maximum of 16 characters, unless otherwise
specified.
Setting Parameters to Supplied Defaults
Each configuration parameter, except the Model 5390 server’s IP address, has a default value. Using
the na command set, you can return any parameter to its default setting (for more details, see set
Command on page C1-21). Depending on the parameter type, the syntax options are:
Setting Model 5390 Parameters
1
set annex annex_parameter 0
The set annex annex_parameter 0 command sets parameters that require a numeric value.
For example, to set pref
_
dump
_
addr to its default, 0.0.0.0, enter:
command: set annex pref_dump_addr 0
2
set annex annex_parameter
""
The set annex
annex_parameter
"" command sets all parameters that require a string value;
these parameters default to either a null string ("") or “<unset>”. For example, to set
image
_ name to its default, a null string (""), enter:
command: set annex image_name ""
NOTE:
Saving the configuration to a file (using the write command)
prevents having to reconfigure the Model 5390 server if nonvolatile
memory is erased.