manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 341 / 888

Share
Download
Bay Networks 5390 Administering Download Page 341

893-741-B

A13-3

Filtering

1

Obtain a valid filtering value for the Model 5390 option_key parameter. Each Model 5390 
server requires a unique value. 

The way to obtain a key depends on the configuration and type of Model 5390 server you 
purchased. Some option key values are physically attached to the Model 5390 server. Check 
there, and enter that value as described in Step 2. 

If there is no option key value attached to your Model 5390 server, contact your supplier to 
obtain a key. You will need to specify the Ethernet address of your Model 5390 server; it is taped 
to the unit.

The option_key parameter enables a variety of Model 5390 features, including tn3270, 
AppleTalk, and IPX, depending on what you specified when you ordered your Model 5390 
server. 

The filtering option_key also enables dial-out and RIP. To determine which options are enabled, 
issue the CLI stats –o command: 

annex: stats –o

KEYED OPTIONS:

MODULES DISABLED

None

For filtering to be enabled, 

dialout/RIP/filtering

 must be displayed as 

keyed on 

and 

dialout

 must 

not 

be

 

displayed under the 

MODULES DISABLED

 heading. See 

disabled_modules

 on page 

C2-21.

2

Use na, admin, or SNMP to set the option_key value you obtained in Step 1. 

In this example, the key is set to 

RaqbDwv8e

 using admin:

LAT: keyed off

Atalk: keyed off

tn3270: keyed on

dialout/RIP/filtering: keyed off

IPX: keyed off

NOTE: 

Although LAT is an option, you set it using the Model 5390 

lat_key parameter, not option_key (see lat_key on page C2-31).

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments