manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 836 / 888

Share
Download
Bay Networks 5390 Administering Download Page 836

893-741-B

Software Reference

D1-40

login_timeout

Y or N

N

Enables a login timer when the VMS command 
interface is configured (that is, when 
cli_interface is set to vci). 

long_break

Y or N 

Y

When enabled, the Model 5390 server returns 
the user to the CLI prompt after receiving a 
break longer than two seconds.

map_to_lower

Y or N

N

Enables/disables case conversion (from upper 
to lower) for characters sent from the terminal 
to the Model 5390 server.

map_to_upper

Y or N

N

Enables/disables case conversion (from lower 
to upper) for characters sent from the terminal 
to the Model 5390 server.

metric

1–15

1

Defines the hop count to the remote end of the 
serial line.

max_session_count

1–16

3

Specifies the number of active sessions (jobs) 
allowed per port.

mode

adaptive, 
arap, 
auto-detect, 
cli, connect, 
dedicated, 
ipx, ndp, ppp, 
rlogin, slave, 
slip, telnet, 
tn3270, 
unused

cli

Sets the mode for access to an asynchronous 
port.

need_dsr

Y or N

N

For use with a modem connected to a slave 
port. When enabled, the connection fails if no 
DSR signal is present; when disabled, the 
Model 5390 server accepts the connection, but 
waits for DSR and DCD before 
communicating with the modem.

net_inactivity

Integer or 0

0 (off)

Defines the amount of time for toll saving 
network inactivity.

Table D1-10. Asynchronous Port Parameters (continued)

Parameter

Values

Default

Description

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments