manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 637 / 888

Share
Download
Bay Networks 5390 Administering Download Page 637

893-741-B

C2-31

Configuration Parameters

lat_key

This Model 5390 parameter restricts access to LAT-related Model 5390 commands, parameters, 
functions, and the LAT protocol within the Model 5390 server. Each Model 5390 requires a unique 
key value (contact your supplier to obtain a LAT key). After setting the key, your system 
administrator must reboot the Model 5390 server.

lat_queue_max

This Model 5390 parameter limits the number of HIC requests that the Model 5390 server can 
queue. This parameter affects only the operation of HIC requests received after changing the 
parameter’s value and setting LAT. Allowable values range from 1 to 255 or none (entering none 
sets the value to 255). The default value is 4.

latb_enable

This asynchronous port parameter enables the Model 5390 server to decode a LAT hosts’s data-b 
packet. Data-b packets change certain asynchronous port parameters (see your LAT host’s 
documentation for more details). A Y enables this parameter, an N disables it. The default is N.

NOTE: 

If latb_enable is set to Y and the LAT host sends a data-b slot 

message requesting that flow control (XON/XOFF) be turned off, the 
Model 5390 server turns off flow control and passes XON/XOFF char-
acters to the host. This scenario can adversely affect both XON/XOFF 
and the cursor keys on the terminal.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments