Bay Networks 5390 Administering Download Page 825

Page: 825 / 888

D1-29

893-741-B

Software Reference

syslog_mask

emergency,
alert,
critical,
error,
warning,
notice,
info,
debug,
all,
none

none

Determines the priority levels for
logging syslog messages.

syslog_port

0–Model 5390
port count

Routes syslog messages to a serial
port. Zero indicates syslogging
over the network.

tcp_keepalive

0–255

0 (120 minutes)

Specifies whether or not the
Model 5390 server sends
keep-alive messages for idle TCP
connections.

tftp_dump_name

string

host-
dependent

Provides the name of the file to
use when dumping the core image
using tftp if the Model 5390
operational image and erpcd fail.

tftp_load_dir

string

host-
dependent

The string prepended to the
image, motd, and configuration
file names for tftp transfers.

time_broadcast

Y or N

Enables/disables broadcasting for
a time server host in case the
preferred load host is not
available.

time_server

loopback
address,
0.0.0.0,
127.0.0.1, host
address,
broadcast
address

0.0.0.0

Determines whether or not the
Model 5390 server queries for
time service.

Table D1-2.

Model 5390 Parameters (continued)

Parameter

Values

Default

Description

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5390

Reviews:

Bay Networks 5390, Administering, Page: 825 / 888

Search results

Summary of Contents for 5390

Reviews: