Bay Networks 5390 Administering Download Page 803

Page: 803 / 888

D1-7

893-741-B

Software Reference

force_CTS

Y or N

Controls the CTS (Clear to Send) signal on
a given port.

forward_key

string

Reopens the next available higher
numbered session already established at
your port.

forwarding_count

0–255

When set, the port will not forward
received characters until it receives the
specified number of characters.

forwarding_timer

0–255, off

Sets the amount of time, in tens of
milliseconds, that will elapse before
forwarding received data.

group_value

enabled or
disabled

all disabled

Security mechanism that restricts access to
LAT services for all users on the
Model 5390 server.

hardware_tabs
(serial port)

Y or N

Allows the terminal to expand ASCII tab
characters if the terminal does not support
hardware tabs.

host_table_size

1–255,
unlimited,
none

Sets the maximum number of entries in the
host table.

image_name

host file name
(up to 100
characters)

Specifies the name of the file containing
the Model 5390 operational code.

imask_7bits

Y or N

When enabled, the Model 5390 port
ignores the eighth bit of received
characters.

inactivity_timer

0–255

0 (off)

Specifies the amount of time, in minutes, a
port can remain inactive before all sessions
are terminated and the port reset.

inet_addr

Internet address

no default

Sets the Model 5390 Internet address.

Table D1-1.

All Parameters (continued)

Parameter

Values

Default

Description

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5390

Reviews:

Bay Networks 5390, Administering, Page: 803 / 888

Search results

Summary of Contents for 5390

Reviews: