manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 832 / 888

Share
Download
Bay Networks 5390 Administering Download Page 832

893-741-B

Software Reference

D1-36

Asynchronous Port Parameters

Table D1-10 lists Asynchronous Port parameters.

Table D1-10. Asynchronous Port Parameters 

Parameter

Values

Default

Description

allow_broadcast

Y or N

Y

Permits the port to receive Model 5390 
administrative broadcasts.

allow_compression

Y or N

N

The Model 5390 server uses TCP/IP header 
compression if the SLIP/PPP link’s end point 
also uses compression.

arap_v42bis

Y or N

Y

Enables V.42bis compression during an ARAP 
session.

at_guest

Y or N

N

Allows guests to log into an ARAP service.

at_nodeid

0–253

0

Defines the node ID given to an ARA client 
during connection establishment.

at_security

Y or N

N

Enables ACP service for the port.

attn_string

control char. 
sequence

""

virtual
CLI=^

A

Defines a control character sequence as an 
attention character or string. 

authorized_groups

enabled or
disabled

all 
disabled

Specifies which remote group codes are 
accessible to users on a particular Model 5390 
port.

autobaud

Y or N

N

Determines whether or not the Model 5390 
server automatically detects line speed when a 
connection is opened, and whether or not it 
sets matching terminal port characteristics on 
the next login.

backward_key

control char 
sequence

""

Reopens the next lower numbered session 
already established at your port, from within 
the current session without returning to local 
mode.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments