Home
/
Bay Networks
/
5390
/
Administering

Bay Networks 5390, Administering, Page: 302 / 888

Share

Page: 302 / 888

Bay Networks 5390 Administering Download Page 302

A12-44

893-741-B

Internet Protocol (IP) Routing

route Command Examples

Both of the following examples add a hardwired route for the destination address 131.108.3.0 using
a subnet mask of 255.255.255.0. This subnet mask indicates that the first two octets are the network
address, the third octet (which normally is part of the host portion of this Class B address) is the
subnet, and the fourth octet is the host (for more information on subnets, see Subnetting Using Subnet
Masks on page A12-13). The next hop is 131.254.33.2 and the metric (hop count) for the route is 2.
The examples are:

annex# route add –h 131.108.3.0 255.255.255.0 131.254.33.2 2

and

annex# route add –h 131.108.3.0/24 131.254.33.2 2

Both of the preceding examples configure the Model 5390 server to use the gateway at 131.254.33.2
as the next hop for any host destination whose address is within the range 131.108.3.1 through
131.108.3.254.

gateway

Specifies the IP address of the gateway (router) that is the
next hop for the route.

metric

Specifies the number of hops to the destination. Values range
from 1 through 15; the default is 1.

Table A12-8. Arguments for route Command (continued)

Argument

Description

«
...
300
301
302
303
304
...
»

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments