Bay Networks 5390 Administering Download Page 845

Page: 845 / 888

D1-49

893-741-B

Software Reference

na Commands

Table D1-16 lists the na commands.

Table D1-16. na

Commands

Command

Arguments

Description

annex

annex_list

Sets the default annex_list.

boot

[–adhlq] [time] [filename] [warning]

Reboots the Model 5390 server. Only ROM
revisions 0600 and greater with the
self-boot option installed support the
–l argument.

broadcast

=[port_set | =broadcast_keyword
[@annex_identifier]] message

Sends a broadcast message to a port(s).

copy annex

annex_identifier annex_list

Copies Model 5390 parameters to other
Model 5390 servers.

copy interface

interface_name@annex_identifier
port_set

Copies all interface parameters from the
specified interface to the interface_set.

copy [port|
asynchronous]

port_number@
annex_identifier port_set

Copies port parameters except the port
password from the specified asynchronous
port to the port_set.

copy printer

@annex_identifier annex_list

Copies printer parameters to
multiple printer ports.

dumpboot

[–aq] [[+] [HH:] [MM]]
annex_list filename warning

Boots the Model 5390 server and produces
an upline dump.

echo

message

Echoes the remainder of the line to standard
output.

help or ?

command

Displays command syntax.

interface

interface_set | all

Groups interfaces in an interface_set,
allowing you to issue one na command to
change parameter values for all interfaces in
the group.

password

Enters the default password.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5390

Reviews:

Bay Networks 5390, Administering, Page: 845 / 888

Search results

Summary of Contents for 5390

Reviews: