manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 440 / 888

Share
Download
Bay Networks 5390 Administering Download Page 440

A15-20

893-741-B

Using Model 5390 Security

The syntax for adding the CLI command mask to a user profile is:

climask command_list end

at_zone

Users can define AppleTalk zone list entries in the acp_userinfo file. This zone list consists of zone 
names (see AppleTalk starting on page A10-1 for more details). Table A15-3 lists the entries for 
at_zone in the acp_userinfo file. The syntax is:

at_zone zone... end

Table A15-2. Entries for climask in the acp_userinfo File 

Entry

Description

command_list

A list of user level CLI commands, separated by commas, 
that are not available to the user. The list of restricted 
command names is sent to the Model 5390 server and the 
user is prevented from executing those CLI commands. Do 
not specify both a job and a climask for a given 
acp_userinfo entry, because if you specify a job that is 
masked, the user cannot execute any CLI command (for 
more details on CLI commands, see Using the CLI 
Commands starting on page C3-1).

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments