Home
/
Bay Networks
/
5390
/
Administering

Bay Networks 5390, Administering, Page: 642 / 888

Share

Page: 642 / 888

Bay Networks 5390 Administering Download Page 642

C2-36

893-741-B

Configuration Parameters

slot on the T1NI or the T1DII. The T1NI and the T1DII can be mapped to each other on channels
that are not occupied by modems. Table C2-9 lists the options that are used with the map parameter.

map_to_lower

This asynchronous port parameter enables the Model 5390 server to convert uppercase characters
sent from a terminal into lowercase characters. This conversion occurs only at the CLI level. Enable
this parameter for older terminals that do not support lower case characters. A Y enables this
parameter, an N disables it. The default is N.

Table C2-9.

Options for the map Parameter

Option

Description

map_val modem_number

These options map an interface channel to a
modem. The map_val option defines the
interface as:

ds1_modem for the T1 Network Interface (the
DS0 channel).

di_modem for the Drop/Insert Interface.

The modem_number option must be specified.
The modem_number value ranges from 1 to 24.

map_val

The map_val option by itself maps the T1
Network Interface to the Drop/Insert Interface.
The map_val defines the type of channel as
data, voice, or unused.

«
...
640
641
642
643
644
...
»

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments