manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 355 / 888

Share
Download
Bay Networks 5390 Administering Download Page 355

893-741-B

A13-17

Filtering

The list subcommand display looks like this:

annex# filter
filter: list

In the preceding example, two filters are displayed. The first filter:

•

Is enabled.

•

Applies to the inbound Ethernet interface.

•

Includes all IP packets coming from or destined for the 
TCP/UDP NFS port.

•

Discards the packet.

•

Sends an ICMP destination unreachable message to the packet’s originator. 

The second filter:

•

Is disabled.

•

Applies to all outbound interfaces.

•

Includes all IP packets coming from, or destined for, the host with an IP address of 
132.254.31.2.

•

Generates a syslog message.

quit

The quit subcommand exits the filtering subsystem and returns control to the CLI.

Num

Stat

Ifname

Dir

Scope

Family

Actions/Parameters

1

Ena

en0

in

incl

ip

disc icmp/port_pair=
nfs,*

2

Dis

all

out

incl

ip

syslog/addr_pair=
132.254.31.2,*

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments