Bay Networks 5390 Administering Download Page 343

Page: 343 / 888

893-741-B

A13-5

Filtering

To return to the superuser CLI from the filter subsystem, use the filter subcommand quit:

filter: quit
annex#

You can also issue filter subcommands directly at the CLI superuser prompt by using the syntax:

filter subcommand

The following shows the list subcommand issued from the CLI superuser prompt. When list
completes, you return to the CLI superuser prompt.

annex# filter list

Num

Stat

Ifname Dir

Scope

Family

Actions/Parameters

ena

en0

incl

disc icmp/port_pair=
*,nfs

ena

en0

incl

disc/port_pair=*,tftp

annex#

Table A13-1. Summary of

filter

Subcommands

Subcommand Description

add

Adds filters and automatically enables them.

delete

Deletes filters.

disable

Disables filters but does not delete them.

enable

Enables filters.

help

Displays a one-line description of one or all filter
subcommands.

list

Displays filters.

quit

Exits the filtering subsystem, returning control to the CLI.

usage

Displays the syntax for one or all filter subcommands.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5390

Reviews:

Bay Networks 5390, Administering, Page: 343 / 888

Search results

Summary of Contents for 5390

Reviews: