Bay Networks 5390, Administering, Page: 811 / 888

D1-15 893-741-B
Software Reference
printer_width integer 80 Sets the maximum number of characters
per line.
prompt coded string "" Defines a port-specific CLI prompt.
ps_history_buffer 0–32767 0 Specifies how much data to buffer on a
slave port.
redisplay_line control char.
sequence ^R Defines the reprint line character.
remote_address Internet address 0.0.0.0 Defines the Internet address for the host at
the other end of the serial line.
reset_idle_time_on input or output input Resets the idle timer on input or output.
retrans_limit 4–120 8 The number of times to retransmit a packet
before notifying the user of a network
failure.
ring Y or N Y T1 parameter that specifies if the T1
engine should provide the audible ring to
the central office for incoming calls.
rip_accept access_spec,
none, all all Controls which routes are accepted from
RIP updates.
rip_advertise access_spec,
none, all all Controls which routes are advertised.
rip_auth <set> or
<unset> "" Enables/disables RIP authentication.
rip_default_route 1–15 or 0 0 (off) Advertises that the Model 5390 server is
the default router and indicates the hop
count.
rip_horizon off, split, poison poison Controls the split horizon algorithm.
rip_next_hop never, needed,
always needed Specifies whether or not the next hop value
is included in RIP version 2
advertisements.
Table D1-1. All Parameters (continued)
Parameter Values Default Description