manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 358 / 888

Share
Download
Bay Networks 5390 Administering Download Page 358

A14-2

893-741-B

Configuring Hosts and Servers

After compiling the ACE/Server installation, the file sdconf.c contains the network addresses for 
the ACE/Server host. See Using the SecurID Card on page A15-55 and the ACE/Server Manual for 
more details.

Setting Up the File Server

The Model 5390 server can boot via the block file server (bfs) program using erpcd or via tftp.

Installing Software Using bfs

Setting up a file server for a bfs installation involves loading, compiling, and installing Annex source 
code on the host. This process has four stages (for more details, refer to Installation Notes for Annex 
10.1 UNIX):

•

Loading the software from the media into a directory.

•

Running the install-annex script.

•

Editing the /etc/services file.

•

Starting erpcd.

When the installation is complete, by default, the image and configuration files are located in the 
directory /usr/spool/erpcd/bfs; the utilities are located in the directory specified during the 
install-annex sequence (the default is /usr/annex).

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments