manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 673 / 888

Share
Download
Bay Networks 5390 Administering Download Page 673

893-741-B

C2-67

Configuration Parameters

tni_line_code

This T1 parameter selects the line code for the T1 Network Interface. The service provider 
determines the line code setting. Parameter settings include ami and b8Zs. The default setting is 
b8zs.

tni_ones_density

This T1 parameter is used to defeat the Model 5390 server ones density monitor. The Model 5390 
server T1 engine has a built in ones density monitor that will provide the network with the correct 
number of one pulses. The ones density monitor performs the following actions:

1

The monitor does not allow the Model 5390 server to transmit more than fifteen 
consecutive zeros.

2

The monitor ensures that the Model 5390 server has at least N ones in every time 
window of 8X(N+1) bits, where N=1 to 23. 

This parameter has an on and an off setting. This parameter should be set to on when using AMI 
coding. The default is off.

toggle_output

This asynchronous port parameter defines the character that flushes the output buffer for CLI users. 
The flush character must be a 

CTRL-

X (^X)

, where 

X

 represents an alphanumeric value (not 

case-sensitive). Pressing this character flushes the output buffer. The default is 

CTRL-O (^O)

.

type (asynchronous)

This asynchronous port parameter affects the operation of two portions of the Model 5390 code: 
the who database (the data set that the Model 5390 server queries when the CLI who command is 
issued or when the Model 5390 server is fingered from a remote host) and the action of dedicated 
ports. The options are dial_in and hardwired. The default is hardwired. 

When set to dial_in, the user is registered with the who database as soon as a process (CLI or slave) 
attaches to the line, regardless of the input_is_activity and output_is_activity parameter settings. 
For dedicated ports, the Model 5390 server continuously retries the connection, regardless of errors, 
as long as DCD is high or modem controls are disabled.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments