manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 792 / 888

Share
Download
Bay Networks 5390 Administering Download Page 792

C5-10

893-741-B

Network Protocols

Each LAT session has two slot groups: slot A is used for data transfer; slot B is used for out-of-band 
data, containing serial port status, characteristics, and data stream attention. Slot data to and from 
the session has a maximum of 256 bytes of user data.

A single packet at the virtual circuit layer can contain several slots. The LAT protocol multiplexes 
data between the Model 5390 server and a particular host by combining several characters per user 
in a slot, and several users in a virtual circuit packet.

Host Initiated Connections

Host initiated connections (HIC) is a network solicitation mechanism that handles printing from a 
VMS host. When a VMS host needs to print, it first multicasts on the network. The responding 
system either accepts the print request, or offers to place it in a queue. After the server accepts the 
print request, it starts a connection to the host and begins the data transfer. 

Using HIC, it is possible to print to a port that does not have an associated advertised service. All 
configurations required for standard HIC printing apply, but the user does not have to edit the service 
portion of the configuration file, and a service name is not required on the VMS side.

LAT and TCP/IP Gateway

A gateway enables a TCP/IP machine to Telnet to a LAT machine, and vice versa. The gateway is 
configured by translation entries in the gateway section of the configuration file. Each entry specifies 
the type, Telnet to LAT or LAT to Telnet. With an established connection through the gateway, the 
translating Model 5390 server has two connections, one for the TCP/IP side and one for the LAT side.

NOTE: 

Define the mode parameter for the Model 5390 port used for 

HIC as slave (for more details, see Port Mode on page A3-5).

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments