manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 688 / 888

Share
Download
Bay Networks 5390 Administering Download Page 688

 

C3-12

893-741-B

 

Using the CLI Commands

 

arap

 

The 

 

arap 

 

command converts a CLI line into an AppleTalk Remote Access Protocol (ARAP) 

connection. Resetting the port returns the CLI to its original mode. The syntax is:

 

arap

 

The command display looks like this:

 

annex: 

 

arap

 

Annex switching line to ARAP.

 

arp

 

The superuser 

 

arp 

 

command displays and, optionally, modifies the IP-to-hardware address 

translation table used by the Address Resolution Protocol (ARP). Because the Model 5390 server 
builds the ARP table dynamically, you rarely need to modify it. Table C3-5 defines the arguments 
for this command. The syntax is:

 

arp 

 

[–ads] [host] [addr] [temp | pub]

Using either the host or the –a argument, arp displays a host name, if known, or a ? in place of the 
host name, the Internet and Ethernet addresses, and the time to live (TTL) field for each entry. For 
example:

annex# arp –a

thirdfloor (132.245.6.65) at 00-80-2d-00-2a-c0 ttl=20
oleom (132.245.6.12) at 00-80-20-06-34-39 ttl=19
? (132.245.6.20) at 00-80-20-01-fe-b1 ttl=19
caddy (132.245.6.25) at 00-80-2d-00-22-41 ttl=20
(23f4.3e) at 08-00-4e-34-22-39 ttl=16

NOTE: 

The na utility is stored on and accessed from a UNIX host.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments