manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 61 / 888

Share
Download
Bay Networks 5390 Administering Download Page 61

893-741-B

A2-1

Chapter A2

Configuring the Model 5390 Server

Configuring the Model 5390 server involves setting parameters to define the unit’s necessary 
operating and administrative attributes. These administrative attributes include:

•

Defining Internet addresses for the Model 5390 server.

•

Defining the preferred hosts for booting and dumping.

•

Setting up security for the Model 5390 server.

•

Setting up the use of name servers.

•

Setting up the use of event logging.

•

Setting the local time zone for using a time server.

•

Customizing the Model 5390 server environment.

•

Configuring LAT services.

•

Configuring the unit for AppleTalk.

For more configuration information, see Internet Protocol (IP) Routing starting on page A12-1.

For more information on using the na commands, see na Commands starting on page C1-1.

For more details on AppleTalk, see AppleTalk starting on page A10-1.

Configuring Model 5390 Parameters

You can configure Model 5390 parameters using the following:

•

The host-based na utility.

•

The CLI superuser admin command.

•

Annex Manager (GUI).

•

A SNMP based manager such as Sun NetManager.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments