manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 75 / 888

Share
Download
Bay Networks 5390 Administering Download Page 75

893-741-B

A2-15

Configuring the Model 5390 Server

Using Name Servers

Name servers allow users to enter names in place of addresses in order to access a host or other 
entity on the network. The Model 5390 server supports two standard types of name servers: a Domain 
Name System (DNS) server and IEN-116 server. In addition, the Model 5390 server can use RWHO 
broadcast messages to provide name-to-Internet address translation. You can configure the Model 
5390 server to use one of these, a combination, or none.

The Model 5390 server supports the minimum uniqueness feature 
when entering host names. This feature allows users to enter the host name with a minimal string 
that is unique enough to identify that host from any other in the host table. If this feature is not 
enabled, the user must enter the complete name to access a host. Host name to Internet address 
translation entries can be downloaded to the Model 5390 server from the gateway section of the 
configuration file. The format is the same as in the /etc/hosts file, but aliasing is not permitted. To 
set up the Model 5390 server for use with a name server:

•

Specify the name server type.

•

Specify the host(s) using the name server.

•

Enable or disable the rwhod parameter.

•

Specify the host table size.

•

Enable or disable the min_unique_hostnames parameter.

Defining Name Servers

The Model 5390 server supports two standard name server protocols: Domain Name System (DNS) 
and IEN-116 server. Both of these name server protocols are available in the UNIX environment. 
You can use one or both on the network, and the Model 5390 server allows you to specify the 
preferred protocol. If you choose not to use either protocol, you can configure the Model 5390 server 
to build the host table by listening to RWHO broadcasts.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments