manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 310 / 888

Share
Download
Bay Networks 5390 Administering Download Page 310

A12-52

893-741-B

Internet Protocol (IP) Routing

routes from all nodes on a particular interface. In either case, be sure to set the proper subnet masks 
for the subnet addresses on the network. Also, be aware that RIP 1 packets do not have fields 
containing subnet masks. Thus, both ends of a RIP 1 communications link must agree beforehand 
on the part of an address that contains the subnet specification. 

Figure A12-6 shows an example in which host03 learns routes to the PC at 132.254.93.2 and the 
host at 132.254.55.222, even though they are on different subnets from that of the Model 5390 
server. This is because 
(1) the Model 5390 server has the rip_sub_advertise parameter set to Y, and (2) all nodes have a 
subnet mask set (correctly) to 255.255.255.0.

Figure A12-6. Advertising Subnet Routes

Subnets are explained in Subnetting Using Subnet Masks on page A12-13. The rip_sub_advertise 
parameter is described in more detail on page A-61. 

NOTE: 

For convenience, the local addresses of the links to the PC 

and host14 in Figure A12-6 are configured to be the same as the 
Model 5390 server’s en0 interface – 132.254.66.134. If host03 supports 
host routes, a subnet mask of all 1s (255.255.255.255) would work for 
the two serial ports on 5390_01.

host03

host04

PC

Network 132.254.66.0

132.254.66.134

132.254.66.135

132.254.93.2

132.254.66.134

Model 5390 server

5171

132.254.66.134

132.254.55.222

System 5000 hub

Subnet mask set to 255.255.255.0 for all nodes

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments