manualshive.com logo in svg

Bay Networks 5390, Administering, Page: 51 / 888

Share
Download
Bay Networks 5390 Administering Download Page 51

893-741-B

A1-3

Introduction to the Model 5390 Server

Customizing the User Interface

Using the Model 5390 macros feature, you can customize the CLI user interface and set up 
site-specific prompts and commands, making the CLI invisible to the user. For example, you can 
create an alias equivalent to one or more CLI commands that connects users directly to a specific 
host and/or application. Or, create menus that hide the command interface, but provide the user with 
the appropriate selection of options.

Loading Files

Model 5390 files can be loaded from a host using either the trivial file transfer protocol (tftp), the 
expedited remote procedure call daemon (erpcd), or the self-boot option.

•

The erpcd utility runs on a UNIX host; it “listens” for Model 5390 file server host requests 
(download of the operational code and other files). 

•

The tftp program, supplied on most hosts, is supported as an alternative to erpcd and as a 
back-up in case a UNIX host is not available to install erpcd. 

•

The self-boot option loads and boots the operational image from local non-volatile memory. 
Only ROM revisions 0600 and greater with the self-boot option installed support self booting.

If a software problem occurs, the Model 5390 server can send a memory dump to a host. These 
dumps assist Bay Networks customer support personnel in resolving problems.

Summary of Contents for 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments